FCB8N

New product

Programmable MIDI foot controller with 7 Program Change Messages (7PC), 8 Continuous Controller Messages (8CC) per preset base on same MIDI channel and 8 Global CC on different MIDI channel. Total 128 Presets arranged in 32 banks of 4 presets with 8 Instant Access controls in 4pr mode or 120 Presets arranged in 10 banks of 12 presets in 12pr mode.

$289.00

Specification

• 1 MIDI OUT with 7-pin DIN connector with phantom power support on pin6 and pin7.

• 1 expression pedal programmable for each patch on independent MIDI channels.

• 2 “bank” and 12 “patch” heavy duty foot switches.

• 128 Presets arranged in 32 banks of 4 presets with 8 Instant Access controls in 4pr mode or 120 Presets arranged in 10 banks of 12 presets in 12pr mode.

• Program Change and Continuous Controller Message support (7PC , on independent MIDI channels, and 8CC messages per preset on same MIDI channel) and 8 Global CC on differrent MIDI channel.

• 8 Instant Access buttons manually toggle the 8 programmable CC Messages On and Off or write a preset value to the controller and support to call 8 Global CC on the instance access buttons.

• Flexible power requirements: 9V-12V, AC or DC, 100mA adapter with a 5.5mm/2.1mm barrel connector. (Adapter is not included)

• Housed in a sleek aluminium, precision laser cut, enclosure coated with a black anodized brushed finish

• Dimensions approx.: 13.0"W x 9.0"D x 2.5"H (33.0cm x 22.90cm x 6.35cm) a little bigger than A4 paper size.

• Weight approx : 3.0lb (1.4kg)



FCB8N with Eleven Rack (By rafamcm)



FCB8N - Overwrite Instance access button (CC) to a Preset

When you run your FCB8N on 4Pr mode, you can use P1-P4 button as a Preset to send 7 midi PC and 8 midi CC. C1-C8 buttons will show you the 8CC status by LED above each button.

On the play, you can change C1-C8 status by click on the C1-C8 button. The preset LED of the instance access will be blinking to let you know some CC data are changed then you can recall the saved data back by simply click on the blinking button.

Or just hold on the blinking button for 2 seconds, the current instance access CC data will be saved and overwrited to the blinking button. This is easy to save new cc data when you are on the play.



















Related Products